Direct Experimental Evidence for Substrate Adatom Incorporation into a Molecular Overlayer.

While the phenomenon of metal substrate adatom incorporation into molecular overlayers is generally believed to occur in several systems, the experimental evidence for this relies on the interpretation of scanning tunneling microscopy (STM) images, which can be ambiguous and provides no quantitative structural information. We show that surface X-ray diffraction (SXRD) uniquely provides unambiguous identification of these metal adatoms. We present the results of a detailed structural study of the Au(111)-F4TCNQ system, combining surface characterization by STM, low-energy electron diffraction, and soft X-ray photoelectron spectroscopy with quantitative experimental structural information from normal incidence X-ray standing wave (NIXSW) and SXRD, together with dispersion-corrected density functional theory (DFT) calculations. Excellent agreement is found between the NIXSW data and the DFT calculations regarding the height and conformation of the adsorbed molecule, which has a twisted geometry rather than the previously supposed inverted bowl shape. SXRD measurements provide unequivocal evidence for the presence and location of Au adatoms, while the DFT calculations show this reconstruction to be strongly energetically favored.

Ultraviolet absorption of contaminants in water.

Contaminants in water were studied using ultraviolet absorption with light emitting diode and deuterium lamp sources, and a thresholding detector. The absorption spectra of potassium hydrogen pthalate, clothianidin, tryptophan, thiamethoxam, uric acid and metaldehyde were obtained in the range 200-360 nm. Only metaldehyde was not suitable for detection in this range. For the other contaminants, and mixtures of pairs of compounds, the transmitted signal could be approximately described with a simple spectral model of the source-absorption-detector system. Combined measurements at two wavelengths could allow relative concentrations in certain mixtures to be determined, and real-time absorption measurements were demonstrated in a flume.

Work function of GaAs(hkl) and its modification using PEI: mechanisms and substrate dependence.

Spin-coating of poly(ethylenimine) (PEI) has been used to reduce the work function of GaAs (001), (110), (111)A and (111)B. The magnitude of the reduction immediately after coating varies significantly from 0.51 eV to 0.69 eV and depends on the surface crystal face, on the GaAs bulk doping and on the atomic termination of the GaAs. For all samples, the work function reduction shrinks in ambient air over the first 20 hours after spin coating, but reductions around 0.2-0.3 eV persist after 1 year of storage in air. Core-level photoemission of thin film PEI degradation in air is consistent with a two-stage reaction with CO2 and H2O previously proposed in carbon capture studies. The total surface dipole from PEI coating is consistent with a combination of internal neutral amine dipole and an interface dipole whose magnitude depends on the surface termination. The contact potential difference measured by Kelvin probe force microscopy on a cleaved GaAs heterostructure is smaller on p-doped regions. This can be explained by surface doping due to the PEI, which increases the band bending on p-doped GaAs where Fermi level pinning is weak. Both surface doping and surface dipole should be accounted for when considering the effect of PEI coated on a semiconductor surface.

Magnetic and structural depth profiles of Heusler alloy Co2FeAl0.5Si0.5 epitaxial films on Si(1 1 1).

The depth-resolved chemical structure and magnetic moment of [Formula: see text], thin films grown on Si(1 1 1) have been determined using x-ray and polarized neutron reflectometry. Bulk-like magnetization is retained across the majority of the film, but reduced moments are observed within 45[Formula: see text] of the surface and in a 25[Formula: see text] substrate-interface region. The reduced moment is related to compositional changes due to oxidation and diffusion, which are further quantified by elemental profiling using electron microscopy with electron energy loss spectroscopy. The accuracy of structural and magnetic depth-profiles obtained from simultaneous modeling is discussed using different approaches with different degree of constraints on the parameters. Our approach illustrates the challenges in fitting reflectometry data from these multi-component quaternary Heusler alloy thin films.

Realisation of magnetically and atomically abrupt half-metal/semiconductor interface: Co2FeSi0.5Al0.5/Ge(111).

Halfmetal-semiconductor interfaces are crucial for hybrid spintronic devices. Atomically sharp interfaces with high spin polarisation are required for efficient spin injection. In this work we show that thin film of half-metallic full Heusler alloy Co2FeSi0.5Al0.5 with uniform thickness and B2 ordering can form structurally abrupt interface with Ge(111). Atomic resolution energy dispersive X-ray spectroscopy reveals that there is a small outdiffusion of Ge into specific atomic planes of the Co2FeSi0.5Al0.5 film, limited to a very narrow 1 nm interface region. First-principles calculations show that this selective outdiffusion along the Fe-Si/Al atomic planes does not change the magnetic moment of the film up to the very interface. Polarized neutron reflectivity, x-ray reflectivity and aberration-corrected electron microscopy confirm that this interface is both magnetically and structurally abrupt. Finally, using first-principles calculations we show that this experimentally realised interface structure, terminated by Co-Ge bonds, preserves the high spin polarization at the Co2FeSi0.5Al0.5/Ge interface, hence can be used as a model to study spin injection from half-metals into semiconductors.

Band gap expansion, shear inversion phase change behaviour and low-voltage induced crystal oscillation in low-dimensional tin selenide crystals.

In common with rocksalt-type alkali halide phases and also semiconductors such as GeTe and SnTe, SnSe forms all-surface two atom-thick low dimensional crystals when encapsulated within single walled nanotubes (SWNTs) with diameters below ∼1.4 nm. Whereas previous density functional theory (DFT) studies indicate that optimised low-dimensional trigonal HgTe changes from a semi-metal to a semi-conductor, low-dimensional SnSe crystals typically undergo band-gap expansion. In slightly wider diameter SWNTs (∼1.4-1.6 nm), we observe that three atom thick low dimensional SnSe crystals undergo a previously unobserved form of a shear inversion phase change resulting in two discrete strain states in a section of curved nanotube. Under low-voltage (i.e. 80-100 kV) imaging conditions in a transmission electron microscope, encapsulated SnSe crystals undergo longitudinal and rotational oscillations, possibly as a result of the increase in the inelastic scattering cross-section of the sample at those voltages.

Heteroepitaxial Growth of Ferromagnetic MnSb(0001) Films on Ge/Si(111) Virtual Substrates.

Molecular beam epitaxial growth of ferromagnetic MnSb(0001) has been achieved on high quality, fully relaxed Ge(111)/Si(111) virtual substrates grown by reduced pressure chemical vapor deposition. The epilayers were characterized using reflection high energy electron diffraction, synchrotron hard X-ray diffraction, X-ray photoemission spectroscopy, and magnetometry. The surface reconstructions, magnetic properties, crystalline quality, and strain relaxation behavior of the MnSb films are similar to those of MnSb grown on GaAs(111). In contrast to GaAs substrates, segregation of substrate atoms through the MnSb film does not occur, and alternative polymorphs of MnSb are absent.

Physical vapor deposition of metal nanoparticles on chemically modified graphene: observations on metal-graphene interactions.

The growth of metallic nanoparticles formed on chemically modified graphene (CMG) by physical vapor deposition is investigated. Fine control over the size (down to ∼1.5 nm for Au) and coverage (up to 5 × 10(4) µm(-2) for Au) of nanoparticles can be achieved. Analysis of the particle size distributions gives evidence for Au nanocluster diffusion at room temperature, while particle size statistics differ clearly between metal deposited on single- and multilayer regions. The morphology of the nanoparticles varies markedly for different metals (Ag, Au, Fe, Pd, Pt, Ti), from a uniform thin film for Ti to a droplet-like growth for Ag. A simple model explains these morphologies, based only on consideration of 1) the different energy barriers to surface diffusion of metal adatoms on graphene, and 2) the ratio of the bulk cohesive energy of the metal to the metal-graphene binding energy. Understanding these interactions is important for controlling nanoparticle and thin-film growth on graphene, and for understanding the resultant charge transfer between metal and graphene.